Vetting a Large-Diameter Fusion Machine Maker
This page is an evaluation tool, not a brochure. It gives you nine checks to run before you commit to any fusion machine supplier, covering production base, component ownership, standards paperwork, published specifications, spares and support hours. Every check is written so you can put the same question to any fusion machine manufacturer, including the FM2000 builder in Jilin Province, China — and compare the answers side by side.
The checklist
Nine Checks to Run Before You Shortlist a Builder
Work down the list in order. Each check links to the section of this page that answers it for the FM2000, so you can see what a complete answer looks like before you ask the next supplier.
Check 01 & 02 · Production base and build list
Manufacturer or Trader? What Each One Can Actually Show You
The difference rarely appears in a brochure. It shows up in whether the seller can name the plant, the assembly address and the individual modules of the machine you are buying.
A reseller can typically offer
- A catalogue file and a price list, with no build sheet behind it
- A closed unit that nobody on the call has opened
- Warranty wording that names no components
- A delivery date that depends on someone else's schedule
- Answers that end with "we will confirm with the factory"
A plant-based builder can offer
- A named production location you can be invited to
- A module list — base machine, facer, heater, storage shelf
- A declared conformity list: TGS D2002, DVS2207-1, ISO11414
- A published power and pressure schedule you can size a site against
- A support line with stated hours and a time-zone reference
Four named modules
The FM2000 is listed as four separate items: base machine, facer, heater and storage shelf. Ask for the build list of each and who assembles it, because a module list is the first thing a reseller cannot reproduce.
From the FM2000 product page specification.
A stated production base
Production and headquarters are stated as China, Jilin Province. Ask for the assembly address and a walkthrough of the floor you would actually buy from — not a showroom.
Decision: if the site cannot be named, treat the quote as brokered.
Reachable support hours
The contact line is published as 86-(0)432-66606688, Monday to Friday 9:00–18:00, with the note "In China, Moscow +5." Convert those hours into your own time zone before you promise a client a commissioning window.
Decision: overlay the stated hours on your shutdown calendar.
Check 03 · Standards and certificates
Standards Conformity: What to Request by Name
Three standards are declared for the FM2000 — TGS D2002 (China), DVS2207-1 (German) and ISO11414 (International). Do not read that as a badge. Read it as a paperwork request you can put to any builder.
| Standard declared | Question to put to the builder | Document to request by name |
|---|---|---|
| TGS D2002 (China) | Does the declaration name the exact model and pipe range you are quoting, or does it only name the brand? | A declaration of conformity identifying model FM-2000 and the Φ1400–Φ2000 pipe range. |
| DVS2207-1 (German) | Which version of the guideline is being claimed, and does the operating manual shipped with the machine reference it? | The version reference in the manual, supplied together with the declaration of conformity. |
| ISO11414 (International) | Will the same declaration be accepted in the tender or customs dossier for your market? | A declaration issued in the language and format your tender or import process accepts. |
What conformity proves
A builder is willing to place a named standard next to a named model — and can be held to that pairing in a purchase contract.
What conformity does not prove
It does not cover your operators, your heater plates, your ambient conditions or your joint records. Field workmanship stays a separate, contractual matter.
What to request by name
The declaration of conformity for model FM-2000, plus the machine's test record at handover, so the file matches the unit on site.
Check 04 · Specification disclosure
The Disclosure Level to Expect From Any Builder
Below is the published parameter schedule for the FM2000, reproduced because the amount of detail is itself the test. A builder who publishes this much can be audited against a contract. One who publishes less cannot.
| Parameter | Published value | Why it decides the purchase |
|---|---|---|
| Model | FM-2000 | The number that must appear on the declaration and the invoice. |
| Pipe range | Φ2000–Φ1400 | Sets whether one machine covers your whole project scope or you need a smaller unit as well. |
| Power supply | 3-phase 220V or 380V | Two options, so the site feed becomes a negotiation item rather than an assumption. |
| Heater power | 45KW | The load your generator or transformer has to carry during heat-up. |
| Hydraulic power | 4KW | Part of the total draw, and the circuit that governs clamp and fusion pressure. |
| Total power | 49KW | The single figure your electrical engineer should size the supply from. |
| Heater temperature rise | Typically within 20–30 minutes | Converts directly into joints per shift when you plan the programme. |
| Hydraulic surface area | 11,820 mm² | A mechanical detail that shows the cylinder is specified, not improvised. |
| Pressure capacity | Up to 14 MPa | Headroom for the larger wall thicknesses in the 1400–2000mm band. |
| Operating ambient temperature | -10°C to 45°C | The envelope a site manager checks against the season and location. |
| Materials | PE, HDPE, PP, PVDF | Determines whether one machine can serve both your polyethylene and your PVDF work. |
| Standards | TGS D2002 (China), DVS2207-1 (German), ISO11414 (International) | The three names you ask the builder to put in writing. |
| Components | Facer, heater, base machine, storage shelf | Lets you price and ship spares per module instead of as a whole unit. |
| Heater temperature set-point | Not stated in the parameters shown | Request the range and the controller calibration method in writing before comparing offers. |
Ask in writing, too: quotation validity, delivery date, spare heater element price, hydraulic seal-kit part numbers, warranty terms naming components, packaging and lifting points, and the insert list included in the price.
Decision module · job to specification
Match the Job to the Specification Before You Match the Price
Each row pairs what the FM2000 publishes with what you still have to confirm on your own project. If the second column cannot be answered, the price is not comparable yet.
Municipal water supply and distribution
PublishedPipe range Φ2000–Φ1400 with PE, HDPE, PP and PVDF material coverage.
Confirm on siteWhether your trunk main outside diameter falls inside 1400–2000mm. Below that band you need a smaller machine, not a discount.
Gas distribution networks
PublishedButt fusion is stated to deliver performance "just like a whole pipe" on pressurized piping.
Confirm on siteWhich standard your gas authority requires, then hold the declaration that names FM-2000 to that requirement.
Mining and slurry lines
PublishedPressure capacity up to 14 MPa, 49KW total power, ambient range -10°C to 45°C.
Confirm on siteThat the pit can supply 3-phase 220V or 380V at 49KW, and that winter ambient stays inside the published envelope.
Marine outfalls and landfill piping
PublishedPE, HDPE, PP and PVDF are all named as supported materials.
Confirm on siteThe exact resin and wall thickness in your design, and the price of the insert set that matches it.
Pipe relining and repair
PublishedInterchangeable inserts adapt the machine across 1400mm to 2000mm.
Confirm on siteHow many inserts the quoted package includes, and how quickly extras reach a repair site.
Industrial fluid distribution
Published45KW heater with a temperature rise typically within 20–30 minutes.
Confirm on siteHow many joints per shift your programme needs — cycle planning starts from that heat-up window.
Decision rule
If your pipe outside diameter falls outside Φ1400–Φ2000, this is not your machine. A seller who lets you order it anyway has told you more about their service than any catalogue will.
Checks 07 & 09 · Lead time and inquiry quality
The 12 Points to Send With Your Inquiry
Send these twelve items in one message. It is the fastest way to receive a comparable quotation instead of a general price list — and the fastest way to test how technically the other side replies.
Pipe outside diameter range in mm — for example 1400 or 2000.
Pipe material: PE, HDPE, PP or PVDF.
Wall thickness or SDR of the pipe you will fuse.
Joints per shift and total project duration.
Site power available: 3-phase 220V or 380V.
Ambient temperature range on site, against the published -10°C to 45°C envelope.
Application: gas, water, mining, marine, relining or industrial fluid.
The standard you must comply with: TGS D2002, DVS2207-1 or ISO11414.
The insert set you need across the 1400–2000mm range.
Spare parts you want quoted alongside the machine itself.
Delivery destination port and the date you actually need it on site.
Whether commissioning and operator training must be included.
Checks 07 & 09 · Lead time and support coverage
Talk to the Builder Before You Shortlist
Send the twelve inquiry points in one message and ask for the declaration of conformity, the insert list and the spare parts pricing in the same reply. That single exchange tells you more about a supplier than a week of emailing brochures.
Production and headquarters: China, Jilin Province
Telephone: 86-(0)432-66606688
Business hours: Monday to Friday, 9:00–18:00 — the site notes "In China, Moscow +5"
Related Products
Keep adjacent product options together for a faster catalog comparison.
Smart Joint High Pressure HDPE Solid Wall Pipe
Engineered for mission-critical infrastructure, these pipes meet PN30-PN20 standards. Trusted by hdpe pipe suppliers and leading hdpe pipe manufacturers globally.
View product
Smart Joint HDPE Sweep Bend
Engineered for industrial pipelines, our HDPE sweep bend offers superior fluid dynamics. We supply high-performance solutions for mining and water infrastructure.
View product
Smart Joint HDPE Tees /Cross
Smart Joint HDPE Tees/Cross provide large bore solutions with zero pressure derating. Trusted by hdpe pipe manufacturers and hdpe pipe suppliers globally.
View productFrequently Asked Questions
how can i tell whether a fusion machine maker actually builds the machine?
ask for the production address and the component build list. for the fm2000, production and headquarters are stated as china, jilin province, and the machine is listed as four named modules: base machine, facer, heater and storage shelf. a reseller rarely names all four or the site where they are assembled.
which standards should i request by name?
tgs d2002 (china), dvs2207-1 (german) and iso11414 (international) are the three standards declared for the fm2000. ask for a declaration of conformity that names model fm-2000 and the φ1400–φ2000 pipe range, so the paperwork matches the machine you are quoted.
does one machine cover the whole 1400mm to 2000mm range?
pipe range is listed as φ2000–φ1400, and interchangeable inserts adapt the machine to sizes between 1400mm and 2000mm. confirm which inserts are included in the quoted price and how quickly additional inserts can ship.
what power supply does the fm2000 need?
three-phase 220v or 380v. the 45kw heater and 4kw hydraulic system give a total of 49kw, which is the figure your site electrician should size the supply against before the machine arrives.
which materials and pressures does it handle?
pe, hdpe, pp and pvdf pipe, with pressure capacity up to 14 mpa and a hydraulic surface area of 11,820 mm². the published operating ambient temperature range is -10°c to 45°c.
how do i reach the team, and what should my inquiry include?
telephone 86-(0)432-66606688, monday to friday 9:00–18:00, with the site noting "in china, moscow +5." include pipe outside diameter, material, wall thickness, site voltage, application and destination port so the reply can be a quotation rather than a price list.